Bently Nevada 3500/20 Rack Interface Module Missing Key RIM Monitor PWA 125744-02
Features
(4) Channel Monitor
Accepts Input from Proximity and Seismic Transducers
Machinery Protection
Provides Essential Machine Information
Description
The GE / Bently Nevada 3500/42M Series Proximitor / Seismic Monitors are four-channel monitors that accept input from proximity and seismic transducers, condition the signal to provide various vibrations and position measurements, and compares the conditioned signals with user-programmable alarms.
You can program each channel using the 3500 Rack Configuration Software to perform the following functions: Radial vibration, Thrust position, Differential expansion, Eccentricity, REBAM, Acceleration, Velocity, Shaft absolute, and Circular acceptance region.
The primary purpose of the 3500/42M Proximitor / Seismic Monitor is to provide machinery protection by continuously comparing monitored parameters against configured alarm setpoints to drive alarms. The modules also provide essential machine information for both operations and maintenance personnel.
Product Family: 3500/42M, 3500-42M
Important Notice: Please note that any additional items included with this equipment such as accessories, manuals, cables, calibration data, software, etc. are specifically listed in the above stock item description and/or displayed in the photos of the equipment. Please contact one of our Customer Support Specialists if you have any questions about what is included with this equipment or if you require any additional information.
Estimated Shipping Size
Dimensions: 1" x 10" x 10" (3 cm x 25 cm x 25 cm)
Weight: 0 lbs 11 oz (0.31 kg)
OTHER SUPERIOR PRODUCTS
| Yasakawa Motor, Driver SG- |
Mitsubishi Motor HC-,HA- |
| Westinghouse Modules 1C-,5X- |
Emerson VE-,KJ- |
| Honeywell TC-,TK- |
GE Modules IC - |
| Fanuc motor A0- |
Yokogawa transmitter EJA- |
Similar Products:
BENTLY NEVADA 3300/03-01-00
BENTLY NEVADA 3300/03-02-00
BENTLY NEVADA 3300/03-03-00
BENTLY NEVADA 3300/05-24-00-00
BENTLY NEVADA 3300/12-01-20-00
BENTLY NEVADA 3300/14-01-20-00
BENTLY NEVADA 3300/16-02-01-00-00-00-00
BENTLY NEVADA 3300/16-02-01-00-01-00-00
BENTLY NEVADA 3300/16-02-01-01-00-00-00
BENTLY NEVADA 3300/16-02-01-02-01-00-00
BENTLY NEVADA 3300/16-02-05-02-00-00-02
BENTLY NEVADA 3300/16-03-01-01-00-00-00
BENTLY NEVADA 3300/16-11-01-01-00-00-00
BENTLY NEVADA 3300/16-12-01-00-00
BENTLY NEVADA 3300/16-12-01-01-00-00-00
BENTLY NEVADA 3300/16-13-01-00-00-00-00
BENTLY NEVADA 3300/16-14-01-01-00-00-00
BENTLY NEVADA 3300/16-15-01-01-00-00-00
BENTLY NEVADA 3300/20-01-01-02-01-00
The 3500/42M Proximitor/Seismic Monitor is a 4-channel monitor that accepts
input from proximity and seismic transducers, conditions the signal to provide
various vibrations and position measurements, and compares the conditioned
signals with user-programmable alarms. The user can program each channel of
the 3500/42M using the 3500 Rack Configuration Software to perform any of the
following functions:
• Radial Vibration
• Thrust Position
• Differential Expansion
• Eccentricity
• REBAM*
• Acceleration
• Velocity
• Shaft Absolute
• Circular Acceptance Region
The primary purpose of the 3500/42M monitor is to provide:
1. Machinery protection by continuously comparing monitored parameters against configured alarm setpoints to drive alarms.
2. Essential machine information for both operations and maintenance personnel.
Each channel, depending on configuration, typically conditions its input signal to generate various parameters called “static values”. The user can configure Alert setpoints for each active static value and Danger setpoints for any two of the active static values.
The 3500/42M Module requiresthe following (or later) firmware,and software revisions:
3500/01 Software – Version 2.50
3500/02 Software – Version 2.20
3500/03 Software – Version 1.21
External Termination Blockscannot be used with Internal
Termination I/O Modules.
When ordering I/O Modules withExternal Terminations theExternal Termination Blocks andCable must be ordered separatelyfor each I/O Module.
Bussed External TerminationBlocks are to be used with TMRI/O Modules only.
Contact person: Anna
E-mail: wisdomlongkeji@163.com
Cellphone: +0086-13534205279
Product Tags:
|
|
Bently Nevada 3500 Proximiter / Seismic Monitor 3500/42M -09-01 Images
|
